Rebuild [any machine] in code, part by part:
1. Write the parts list first, with real dimensions and a source for each.
2. Make every part its own function. Place them one at a time.
3. After each part, run the design rules: clearances, clashes, stack gaps, envelope. Stop and fix anything that fails.
4. Animate the launch last.
Show me the parts list first. No code until I say go.
用代码逐个零件地重建[任意机器]：
1. 先列出零件清单，包含实际尺寸以及每个零件的来源。
2. 把每个零件封装成独立的函数，一次放置一个。
3. 每添加一个零件后，都要跑一遍设计规则检查：间隙、干涉、堆叠间距、包络范围。发现不合规的地方就停下来修复。
4. 最后再做启动动画。
先把零件清单给我看看。在我说“开始”之前，不要写任何代码。
Comments & Questions (0)
No comments yet
Be the first to comment!